Saturday, September 27, 2014

Splined Miter Jig and the Resulting Picture Frames

Here are a few pictures from back in 2016 showing a picture frame which was the first thing I made using my brand new jig: a miter sled I built from scratch for my Jet table saw.

The frame is Indian Rosewood. It has a very strong grain and is slightly oily. It was easy to book match, and each corner has a key from some yard cypress. The contrast between the two woods wasn't enough to make them stand out, but it gave the frame lots of strength. The finish is paste wax and nothing else. Very lustrous.

The glue up was really awkward due to the thickness of the piece. I bought strap clamps for next time. I'm not a fan of the simple geometry either. I need to take the time to make a few more shaping passes before cutting the miters. The frame itself kind of consumes the photo placed therein because there is such a deep well between the inside edge and the glass. It is very chunky as a result.

The hardware and glass was bought or salvaged from cheaper frames. I didn't measure right for the glass and had to shave a mm off one side to make it work. Gulp.

Post a Comment